Fast, Reliable Chimney Cap & Crown Across Inverness
A properly fitted chimney cap and sound mortar crown in Inverness typically costs between $280 and $1,400 depending on whether you’re protecting one flue or four, and most jobs we dispatch to the village are completed same-day. We’ve been driving out to Inverness since 2014, and our technicians know the winding estate roads off Dundee, the mature canopy along Palatine Road, and the particular way the wind hits chimneys on those one-acre lots. Call (888) 289-6055 - a live person answers, even at 10 p.m. on a Sunday.
Why Hearthstone Chimney Co. of Chicago Is Inverness’s Preferred Chimney Cap & Crown Company
Our Chimney Cap & Crown team has worked on hundreds of Inverness chimneys over 42 years. We’ve replaced rusted single-flue caps on 1960s colonials near Inverness Drive, coated spalling crowns on 1980s contemporaries back in the Woods, and fitted custom multi-flue caps on estate homes along Bradley Road. Inverness homeowners tend to stay put for decades, and they remember which contractors show up on time and which ones don’t. We document every inspection with photos you can see and a plain-English verdict - no jargon, no scare tactics. Most calls to Inverness go out same morning, and our background-checked, uniformed technicians carry the parts to finish in one visit. The 90-Day Done Right Promise covers every job in writing: if it’s not right, we come back, no paperwork, no arguing.
Our Chimney Cap & Crown Services in Inverness
Cap Installation
New cap installation in Inverness runs $280-$550 for a standard single-flue stainless steel model, with copper and custom sizes climbing from there. Many homes in the village have never had caps at all, especially those built in the 1970s when builders treated chimneys as afterthoughts. We measure on-site, account for your flue dimensions and roof pitch, and install DuraFlex or Gelco caps sized precisely - no universal-fit hardware store specials that blow off in the first February wind.
Cap Replacement
Replacing a rusted, wind-damaged, or animal-chewed cap in Inverness typically costs $320-$680. The original caps on these estate homes are often 20-30 years old, galvanized steel turned to lace. We remove the old unit, inspect the flue tile beneath for hidden cracks, and install a replacement that matches or exceeds the original. On a recent job in the Inverness Woods neighborhood, we found a 1970s brick chimney with four flues - three serving fireplaces and one a wood stove - all lacking caps. The original clay tile liners were crumbled from freeze-thaw damage, and we installed a custom multi-flue copper cap and repaired the crown with HeatShield coating to seal the exposed brick.
Crown Repair
Crown repair in Inverness averages $450-$900 for cracks and moderate spalling, with full rebuilds reaching $1,200-$1,800 for severely deteriorated concrete or mortar tops. The village’s 190 heating days and brutal March freeze-thaw cycles punish chimney crowns that sit exposed above the roofline. We grind out cracked mortar, repour with proper slope and drip edge, and finish with a waterproof sealant so water sheds instead of soaking in. Done right - and we stand behind it.
Crown Coating
Crown coating with HeatShield or similar professional-grade resurfacer costs $380-$650 in Inverness and adds 10-15 years of service life to a crown that’s sound structurally but weathered on the surface. This is often the right call for 1980s and 1990s chimneys where the crown is intact but hairline cracks are starting to map the surface. We clean, prime, and apply in controlled lifts so the coating bonds properly and sheds water the way the original design intended.
Multi-Flue Cap
Multi-flue caps are the standard need in Inverness, not the exception. A typical installation covering two to four flues runs $680-$1,400 depending on overall dimensions, material (stainless, galvanized, or copper), and whether we need to fabricate custom skirts for irregular chimney footprints. These estate homes were built with multiple fireplaces as selling points, and a single cap protecting the whole chimney top is more secure, better looking, and more cost-effective than individual caps rattling in the wind. We measure, fabricate, and install to fit - no gaps, no shortcuts.
Custom Cap
Custom caps for historic or architect-designed Inverness homes start around $850 and scale with complexity. Copper weathers to that green patina homeowners near the golf course often want. We work from your existing chimney profile or architectural drawings, and we don’t proceed until you’ve approved the design. A square deal: no surprises on the bill.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Inverness
We stock caps, crowns, and repair materials from DuraFlex, HeatShield, Gelco, and Olympia Chimney - brands that hold up to Chicago winters, not builder-grade substitutes that fail in three seasons. Our warehouse carries common Inverness sizes, so most cap replacements and crown repairs don’t wait on shipping. When we need custom fabrication for a multi-flue estate cap, we work with foundries we’ve used for decades. The parts matter. So does having them when we say we’ll be there.
Common Chimney Cap & Crown Problems We See in Inverness Homes
- Leaf litter and debris clogging from the oak canopy. The dense hardwood canopy that defines Inverness deposits leaves, twigs, and acorns directly onto chimney tops. Uncapped flues or caps with deteriorated mesh screens clog quickly, backing up smoke and accelerating corrosion on metal components.
- Animal intrusion from overhanging branches. The mature hardwood canopy overhanging many Inverness rooflines gives squirrels and raccoons near-direct access to chimney tops. Technicians here regularly find animal nests deep in flues of homes whose owners have never installed a chimney cap - a call pattern far less common in the open, treeless subdivisions just a few miles east in Palatine.
- Freeze-thaw crown cracking. March in northwest Cook County means daily temperature swings above and below freezing. Water seeps into hairline cracks, expands overnight, and turns a sound crown into a crumbling mess by spring. Chimneys without adequate cap protection take the worst of it.
- Multi-flue neglect on estate homes. With two, three, or four fireplaces per property, it’s easy for Inverness homeowners to lose track of which flues were last inspected. The second-floor fireplace that gets used twice a year often has the most deteriorated cap, simply because no one’s looked at it in a decade.
Pricing for Chimney Cap & Crown in Inverness, IL
Here’s what we charge for chimney cap and crown work in Inverness. These are real ranges for real jobs we’ve completed in the 60067 ZIP code:
| Service | Typical Range in Inverness |
|---|---|
| Single-flue cap installation (stainless steel) | $280 - $550 |
| Cap replacement (removal + install) | $320 - $680 |
| Multi-flue cap (2-4 flues, stainless) | $680 - $1,100 |
| Multi-flue cap (copper or custom) | $950 - $1,400 |
| Crown coating (HeatShield or equivalent) | $380 - $650 |
| Crown repair (crack repair + seal) | $450 - $900 |
| Full crown rebuild | $1,200 - $1,800 |
What moves the number: height and roof access (steep pitches or three-story chimneys take longer), number of flues, material choice, and whether we discover hidden damage once the old cap comes off. We give you the full price before we start - no-hassle upfront pricing, the number on the estimate is the number on the invoice. Seniors and veterans receive a permanent 5% discount. Call (888) 289-6055 for a free estimate.
We Also Serve Cities Near Inverness
Our Chimney Cap & Crown in Inverness coverage extends throughout the northwest suburbs. We regularly dispatch to Palatine, Rolling Meadows, Arlington Heights, and Long Grove from our Chicago base, with same-day service to most of Cook County’s northern corridor. Whether you’re in a 1960s ranch near Rand Road or a custom estate off Cuba Road, we’ll be there when we say.
Serving Inverness, IL - Our Local Coverage Area
We’re based in the Inverness area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Cap & Crown in Inverness
Multi-flue caps protect all your flues with a single, secure installation that’s less likely to leak or blow off than multiple individual caps. Inverness’s large custom homes built between the 1960s and 1990s often feature two, three, or even four wood-burning fireplaces per property, making multi-flue chimney caps and crown repairs the norm, not the exception. Individual caps create seams and gaps where water and animals enter, and they rarely survive Chicago’s wind as well as one properly fabricated multi-flue unit. Call (888) 289-6055 and we’ll measure your chimney top - estimates are free.
The dense oak and hardwood canopy accelerates cap deterioration by depositing leaf litter, twigs, and moisture directly onto the chimney top. This debris clogs mesh screens, traps moisture against metal surfaces, and provides nesting material that attracts animals. Caps in wooded Inverness need more frequent inspection than those in open subdivisions, and stainless steel or copper holds up better than galvanized steel in this environment. We check canopy clearance and cap condition on every Inverness call - call (888) 289-6055 to schedule.
Freeze-thaw cracking is the most common crown failure we see in Inverness, typically appearing in March after months of water infiltration and overnight temperature swings below freezing. The original crowns on 1960s-1990s chimneys were often poured with too little slope, no drip edge, or inadequate reinforcement, so they collect water instead of shedding it. By the time homeowners notice interior leaks, the crown has already passed the point where coating alone will save it. Early inspection catches this - call (888) 289-6055 for a Level-2 camera inspection with photos you can see.
Yes. An unused flue without a cap is an open hole in your roof that lets in rain, animals, and debris regardless of how often you burn. In Inverness, we’ve found squirrels nesting in flues of homes where the fireplace hasn’t been lit in five years, and water damage from uncapped chimneys costs far more to repair than a basic cap installation. The cap protects the chimney structure itself, not just your fire habits. Call (888) 289-6055 - we’ll show you what your flue looks like from the inside.
We can match most architectural styles with custom copper or fabricated steel caps, and we work from photos or on-site measurements to preserve your home’s character. Many Inverness estates were designed with specific visual profiles in mind, and a generic cap throws off the roofline. We’ve fabricated copper caps for 1970s contemporaries, traditional skirts for colonial revivals, and low-profile units where HOA sight lines matter. The design is part of the estimate - no charge for the consultation. Call (888) 289-6055 to discuss your chimney.
Ready to protect your Inverness chimney? Call Hearthstone Chimney Co. at (888) 289-6055 for a free estimate. A live person answers 24 hours a day, 7 days a week. We’ll inspect your cap and crown, show you photos of what we find, and give you a plain-English verdict with upfront pricing. The 90-Day Done Right Promise covers every job in writing - if it’s not right, we make it right, no arguing.
Written by the team at Hearthstone Chimney Co., serving Inverness and Chicago’s northwest suburbs since 2014.