Fast, Reliable Chimney Liner & Rebuild Across Mount Prospect
Chimney liner replacement and rebuild work in Mount Prospect typically runs $2,800-$7,500 depending on whether we’re relining a single flue or rebuilding from the roofline up, and most jobs are completed in one day with our crew arriving from our Chicago base. We’re familiar with the post-war ranch homes and split-levels that define Mount Prospect’s neighborhoods, from the streets near Randhurst Village down to the Cape Cods clustered along Busse Avenue and Elmhurst Road. If you’re seeing water stains on the ceiling near your chimney, smelling smoke in rooms upstairs, or pulling heavy creosote despite light fireplace use, the problem often traces back to a 50-70 year-old clay tile liner that’s finally given out. Call us at (888) 289-6055 - a live person answers, 24 hours a day.
Why Hearthstone Chimney Co. of Chicago Is Mount Prospect’s Preferred Chimney Liner & Rebuild Company
We’ve been serving Mount Prospect homeowners since before many of the village’s split-levels turned forty, and that longevity means something here. Our Chimney Liner & Rebuild team has worked on the same vintage chimneys in Rand Park, near Central Road, and throughout the 60056 zip code long enough to recognize the patterns: which block faces spall first, how the original combination flues were sized, where the crowns typically crack after sixty Illinois winters.
Mount Prospect customers tell us they chose us because we document every inspection with photos they can see and a plain-English verdict - no vague hand-waving, no pressure to commit on the spot. Our Level-2 camera inspections end with a written report and images of the flue interior, so you understand exactly what we found before we talk about fixing it.
We arrive when we say we will. Most liner replacements and partial rebuilds finish in a single visit, with no-hassle upfront pricing that matches the final invoice. And every job carries our 90-Day Done Right Promise in writing - if it’s not right, we come back, no paperwork, no arguing.
Our Chimney Liner & Rebuild Services in Mount Prospect
Stainless Steel Liner Installation
For most Mount Prospect homes built between 1950 and 1975, a stainless steel liner is the proper fix for deteriorated clay tile. The original flue tiles in these ranch homes and Cape Cods were never designed to handle modern appliance efficiency or the thermal stress of decades of freeze-thaw cycling. We install DuraFlex and Olympia Chimney stainless steel liners, properly sized to the appliance - critical in Mount Prospect, where we regularly find combination flues that were left oversized after furnace upgrades. A correctly sized 6-inch liner for a fireplace, or a smaller diameter for a gas insert, restores proper draft and eliminates the chronic creosote buildup that plagues unlined oversized flues.

Flexible Liner Installation
Some of Mount Prospect’s 1970s split-levels and two-story colonials have chimney offsets or bends that rigid stainless steel cannot navigate. For these, we use DuraFlex flexible liners that conform to shifting flue passages while maintaining the same corrosion resistance and proper sizing. Flexible liners are particularly useful in homes near Euclid Avenue or along the older sections of Main Street, where chimney construction sometimes followed the roofline in ways that create awkward transitions. The installation still ends with a proper top plate, insulation where code requires, and a termination cap that keeps out the driving rain and snow common to Mount Prospect’s lake-influenced winters.

Liner Replacement
Full liner replacement becomes necessary when clay tile spalling, cracking, or mortar loss has compromised the flue’s ability to contain combustion gases. In Mount Prospect, this condition is epidemic - not occasional. The village’s concentrated build era means entire neighborhoods of same-vintage chimneys are reaching end-of-life simultaneously. We remove the damaged tile when accessible, or break and collapse it in place when removal would damage surrounding masonry, then install a new stainless steel liner with proper insulation and connections. We recently relined a shared flue in a 1963 split-level on Busse Avenue. The original clay tile had offset joints and spalling from decades of freeze-thaw; after the furnace was upgraded to a sidewall-vented unit, the fireplace flue was left oversized, causing heavy condensation. We installed a 6-inch DuraFlex stainless steel liner, properly sized for the fireplace, and performed a partial crown rebuild to prevent further water intrusion.

Partial Chimney Rebuild
When the liner has failed but the chimney structure remains sound below the roofline, a partial rebuild addresses the damaged section without the cost of full reconstruction. In Mount Prospect, this typically means rebuilding the crown, replacing deteriorated brick courses near the top, and installing proper flashing where the chimney meets the roof. The crown rebuild is especially important here - Mount Prospect’s freeze-thaw cycling from November through March destroys crown seals faster than in drier climates, and a rebuilt crown with proper overhang and slope directs water away from the brickwork below. We use professional-grade materials from Gelco and Copperfield for these repairs, matched to the existing chimney’s dimensions and the local exposure.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Mount Prospect
We work exclusively with professional-grade materials - DuraFlex and Olympia Chimney for stainless and flexible liners, HeatShield for cerfractory flue resurfacing where tile is sound but joints have opened, and Gelco for caps and custom flashing. These aren’t builder-grade substitutes; they’re the brands that chimney professionals specify when the job needs to last. We stock common liner diameters and fittings for Mount Prospect’s typical fireplace and furnace configurations, which means faster turnaround and no waiting on back-ordered parts when your chimney is out of service.
Common Chimney Liner & Rebuild Problems We See in Mount Prospect Homes
- Spalling clay tile from freeze-thaw damage. Original clay tile liners in 1950-1970 ranch homes develop surface flaking and through-cracks from repeated freeze-thaw cycles. The damage starts invisible inside the flue, then progresses to gaps that allow flue gases into wall cavities. Our Level-2 camera inspection catches this before it becomes a carbon monoxide or structural issue.
- Oversized combination flues after furnace upgrades. A very common find in 1960s-70s Mount Prospect homes is an oversized combination flue that once served both the original oil or gas furnace and the fireplace. After the furnace was swapped for a high-efficiency unit venting through a sidewall PVC pipe, the old shared flue was left serving only the fireplace but was never relined to the correct smaller diameter. The result is a chronically cold, oversized flue that accumulates heavy creosote and condensation moisture even with light use.
- Crown and mortar failure admitting water. Crumbling mortar and failing crown seals on 50+ year-old chimneys allow moisture to enter the brick structure. In Mount Prospect’s climate, this moisture freezes, expands, and accelerates deterioration from the inside out - causing interior wall damage, rusted dampers, and restricted flue function that makes fires harder to start and keep lit.
- Offset joints from settling and thermal cycling. Decades of heating and cooling, combined with minor foundation settling common in Mount Prospect’s clay-heavy soils, can shift clay tile sections out of alignment. Offset joints create turbulence that reduces draft and provides ledges where creosote deposits accumulate, increasing fire risk and requiring more frequent cleaning.
Pricing for Chimney Liner & Rebuild in Mount Prospect, IL
A typical stainless steel liner installation in Mount Prospect runs $2,800-$4,200 for a standard fireplace flue, including removal or collapse of damaged tile, proper sizing and insulation, and a new cap and top plate. Liner replacement in combination flues that require resizing after furnace upgrades generally falls in the $3,200-$4,800 range, reflecting the additional measurement and adaptation work. Partial rebuilds involving crown reconstruction and upper brick replacement typically cost $1,800-$3,500, while full chimney rebuilds from the roofline up range from $5,500-$7,500 depending on height, accessibility, and matching existing brick.
Several factors move these numbers: chimney height and roof pitch, whether the flue is straight or offset, the degree of tile damage, and whether the existing crown and flashing can be salvaged. We provide no-hassle upfront pricing after our Level-2 inspection - the number on the estimate is the number on the invoice. Call (888) 289-6055 for a free estimate; estimates are free, and we honor our $50 off any repair over $250 for Mount Prospect homeowners.
We Also Serve Cities Near Mount Prospect
Our Chimney Liner & Rebuild in Mount Prospect crew regularly travels to neighboring Arlington Heights, Prospect Heights, Des Plaines, and Rolling Meadows - the same post-war housing stock, the same liner issues, the same straightforward approach. If you’re in one of these communities and need chimney work, the same live-answer phone line and same-day scheduling applies.
Serving Mount Prospect, IL - Our Local Coverage Area
We’re based in the Mount Prospect area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Liner & Rebuild in Mount Prospect
Yes - original clay tile in Mount Prospect’s 60-year-old chimneys is typically cracked or spalling internally even when the fireplace appears to function. The damage hides inside the flue where you cannot see it, and continued use risks flue gas leakage into wall cavities or living spaces. Call (888) 289-6055 to schedule a Level-2 camera inspection; estimates are free, and we’ll show you exactly what the flue looks like inside.
Your combination flue was left oversized for the fireplace alone, creating a cold, slow draft that cannot carry smoke and moisture up and out efficiently. This is one of the most common chimney problems we diagnose in Mount Prospect’s 1960s-70s homes. We resize the flue with a properly dimensioned stainless steel liner - typically a 6-inch round for a standard fireplace - which restores correct draft velocity and eliminates the creosote accumulation. Call (888) 289-6055; we’ll measure the flue and give you an exact quote.
Most Mount Prospect chimneys with crown damage but sound brickwork below need only a partial rebuild - crown reconstruction, upper mortar repointing, and proper flashing replacement. We reserve full rebuilds for cases where the structural brick courses have deteriorated significantly or where multiple flues have shifted out of plumb. Our inspection determines which applies to your chimney; call (888) 289-6055 for a free assessment.
Yes - flexible liners are specifically designed for chimneys with offsets or bends that rigid pipe cannot navigate. We’ve installed DuraFlex flexible liners in many Mount Prospect split-levels where the chimney steps to follow the roofline or shifts around framing. The flexible material conforms to the passage while maintaining proper diameter and corrosion resistance. Call (888) 289-6055 to schedule an inspection and confirm your flue’s configuration.
Yes - frequency of use does not prevent the underlying deterioration of 50-70 year-old clay tile, and in fact light use can mask problems longer because there’s less smoke to reveal draft failure. An unlined or damaged flue also admits moisture and vermin during the months you don’t burn, accelerating damage to the chimney structure and adjacent framing. The 90-Day Done Right Promise applies whether you burn daily or twice a winter. Call (888) 289-6055 for an inspection and upfront pricing.
Ready to get your Mount Prospect chimney sorted? Call (888) 289-6055 now - a live person answers, 24 hours a day, 7 days a week. We’ll schedule your Level-2 camera inspection, show you photos of what we find, and give you no-hassle upfront pricing before any work begins. Done right - and we stand behind it.
Written by the team at Hearthstone Chimney Co., serving Mount Prospect and Chicago-area communities since 2014.